Stainless steel punching Metal Sheet hole meshes
Product Nname
punching plate/punching mesh/garden mesh/hole plate/metal punching mesh.
Specifications
| Material quality | Contour dimension | Thickness | Bore diameter | Pitch-row |
Low carbon steel plate Aluminized zinc sheet
Galvanized sheet
Aluminum plate
Stainless steel plate | 1m*2m | 0.8mm-1.0mm | 1mm-20mm | 2mm-4mm |
| 1.2mm-1.5mm | 2mm-20mm | 2mm-10mm |
| 1.8mm-3.0mm | 2mm-20mm | 2mm-10mm |
| 0.4mm-0.5mm | 1mm-10mm | 1mm-4mm |
| 0.8mm | 1mm-20mm | 1mm-10mm |
| 1.0mm | 1mm-20mm | 1mm-10mm |
Use of Punch Plate
through the size, density and arrangement of different holes, to meet the equipment separation, screening, washing and filtering, ventilation and drying and heat dissipation, noise elimination, purification and other functions.
Punching Mesh Screen Is How To Calculate
so-called mesh, refers to the granularity of the material or thickness, a definition refers to the 1 inch by 1 inch area has how many mesh count, the screen mesh count, the material.Can pass how many mesh: the mesh is defined as such as 200 mesh, is that the material can pass one inch by one inch has 200 mesh sieve.
Punching Sheet Manufacturer What Price
1. stainless steel microporous network (thickness: aperture = 1:1) the pore size of 0.4 mm, 0.5 mm, 0.6 mm, 0.7 mm, 0.8 mm, 1 mm.
2. export plastic spraying aluminum plate mesh, the thickness of 1.6 mm, 2 mm) diameter 2 mm to 3.5 mm.
3. longmen rushed the whole row of punching (coil width can reach 1500 mm) diameter of 2.5 mm - 10 mm.
4. caigang volume, aluminum zinc plating, stainless steel coil, aluminum coil, cold-rolled coil can coil punching.
5. stainless steel plate punching hole (reverse punching, such as 2mm plate punching 1.5mm aperture, etc.)
Stainless Steel Punching Screen Plate How To Install The Frame
1. through the installation hole directly with screws installation, in the hole mesh, stainless steel punching plate around the installation hole, later directly fixed.
2. through bending, stuck on the equipment to be installed, bending can not only enhance the strength of the plate, but also facilitate installation.
3. through the welding process, directly the hole plate welding on the support, plastic spraying, so that the front looks very beautiful.Above is punch plate in our life the most common use of the installation, when you install, mainly understand the use of punch plate.
Punching Metal Mesh Packing:
waterproof paper inside and woven bag outside per roll; steel belt pallet or steel pipe pallet per piece; in wooden box per piece.
Product Tags:
|
|
0.4mm Microporous 1mx2m Aluminum Plate Punching Mesh Images
|
